The smoke finish of this lamp gives you a cool modern look.
The Breeze X1 in smoke is the latest technology in a modern and super stylish design. This taillight is ultra-slim with a depth of only 28 mm. It fits perfectly on your vehicle and you give it a modern and sophisticated look, without compromising on functionality.
In addition to this smoke version, a version with clear glass is also available.
Why choose the Breeze X1 smoke?
The Breeze X1 smoke has all the important functionality in it:
taillight
brake light
turn signal light
You can place several Breeze X1 lights next to each other and switch the turn signal so that it dynamically goes from one light to the next. The smoke glass will give your vehicle a modern but also tough look.
Other Specifications:
ECE R148 (approved for all three functions).
IP67 (water and dust proof)
Voltage: 10-48V
Warranty period: 36 months
Dimensions:
Width: 110 mm
Height: 133 mm
Depth (overall): 28 mm
Depth (recessed): 10 mm
Cable: 2.5 m
Hole spacing: 115 mm
Synchronized turn signals: To flash all turn signals on the same side at the same time, connect the respective yellow cables to the respective side.
Dynamic turn signals: To get dynamic (running) turn signals, connect the yellow wire from the inner bulb to the signal wire from your existing turn signal relay. Then connect the green wire from the inner bulb to the yellow wire from the bulb next to the first one and
continue this way from the inner to the outer bulbs. Refer to the illustration in the instruction manual.
Cable colors:
Black - minus (ground)
White - taillight
Red - brake light
Yellow - turn signal (in-signal)
Green - turn signal output to next bulb
Definitely visible!
You are always clearly visible to other road users because the Breeze X1 is equipped with a total of 162 LEDs. Ultimately, a tail light has only 1 purpose and that is safety. It is about being seen. And as far as we are concerned, that can be done in style! Of course the light functions are E-approved, there can be no discussion about that for such lighting. For ease of connection, the Breeze X1 comes with 2.5m cable.
What will you receive?
1x Ledson Breeze X1 taillight with smoke glass
2.5 meter cable
2 screws
Installation instructions
Delivery
We have this taillight in stock, so you will have your order the next day or within a few days. If it is different, we will inform you about it
Opinion
Combine this lamp with a work light from the Epix Work series. This comes in different sizes and you complete the Breeze X1 with an approved taillight / reversing light / work light. In addition, the strobe function of the Epix ensures maximum visibility!
Need additional advice? We are here for you!
3608007323230051660
Data sheet
Accessory
Lighting
Producttype
Tail light
Product serie
Breeze
Serial model
X1
Version
smoke
Shape
Rectangular / Oval
Width (mm)
110
Height (mm)
133
Depth (mm)
28
Light type
LED
Lighting - Type
Brake light
Indicator
Rear Light
E-mark
yes
ECE approval
R148
Glass color
smoke
IP rating
IP67
Voltage
12V
18V
24V
30V
36V
42V
48V
Cable Length (cm)
250
Sales unit
Single item
Standard Delivery time
1-3 business days
prodcat1
M
Shipping Size
S
Specific References
Comments (0)
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.