This taillight has the functionality you need in a stylish housing.
The Breeze X1 is an ultra-slim taillight and has a depth of only 28 mm. This combines a stylish and modern design with the latest technology. This taillight is perfect if you want to give your vehicle a sophisticated and modern look, without compromising on functionality.
In addition to this version, a version with smoke glass is also available.
Why choose the Breeze X1?
The Breeze X1 has all the important functionality in it:
taillight
brake light
turn signal
You can interconnect multiple lamps side by side, allowing the flashing light to move dynamically from one lamp to the next. The clear glass gives your vehicle a modern and sleek look.
Other Specifications:
ECE R148 (approved for all three functions).
IP67 (water and dust proof)
Voltage: 10-48V
Warranty period: 36 months
Dimensions:
Width: 110 mm
Height: 133 mm
Depth (overall): 28 mm
Depth (recessed): 10 mm
Cable: 2.5 m
Hole spacing: 115 mm
Synchronized turn signals: To flash all turn signals on the same side at the same time, connect the respective yellow cables to the respective side.
Dynamic turn signals: To get dynamic (running) turn signals, connect the yellow wire from the inner bulb to the signal wire from your existing turn signal relay. Then connect the green wire from the inner bulb to the yellow wire from the bulb next to the first one and
continue this way from the inner to the outer bulbs. Refer to the illustration in the instruction manual.
Cable colors:
Black - minus (ground)
White - taillight
Red - brake light
Yellow - turn signal (in-signal)
Green - turn signal output to next bulb
Definitely visible!
Because the Breeze X1 is equipped with a total of 162 LEDs, you are sure to be clearly visible to your fellow road users. It's all about safety and you want to be seen. That it is stylish is an afterthought, but an important one! Of course the light functions are E-approved, you should not compromise on that with this kind of lighting. The lamp comes with 2.5m cable, so plenty of connection options.
What will you receive?
1x Ledson Breeze X1 taillight with clear glass
2.5 meter cable
2 screws
Installation instructions
Delivery
This taillight will be delivered to you the next day or within a few days at the latest. If it will be different, we will inform you.
Opinion
Combine this lamp with a work light from the Epix Work series. This way you complete the Breeze with an approved rear light / reversing light / work light that also has a flash function. So you are visible to the maximum.
Do you need additional advice? We are here for you!
3608017323230051677
Data sheet
Accessory
Lighting
Producttype
Tail light
Product serie
Breeze
Serial model
X1
Shape
Rectangular / Oval
Width (mm)
110
Height (mm)
133
Depth (mm)
28
Light type
LED
Lighting - Type
Brake light
Indicator
Rear Light
E-mark
yes
ECE approval
R148
Glass color
Clear
IP rating
IP67
Voltage
12V
18V
24V
30V
36V
42V
48V
Cable Length (cm)
250
Sales unit
Single item
Standard Delivery time
1-3 business days
prodcat1
M
Shipping Size
S
Specific References
Comments (0)
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.