Wiring kit - Denali - Soundbomb

DENALI SoundBomb Horn Wiring Adapter Universal

Simple and inexpensive Plug-N-Play wiring harness for DENALI SoundBomb Compact & DENALI SoundBomb Split Horns.

You don't have to cut, cut, solder or crimp, as long as the original horn has cable lug connections.

Characteristics:
No need to cut, solder or crimp before connecting if the horn has lug connectors.
Extra connections for custom applications.
Wire harness length: 167 cm
30 amp inline mini fuse
Inline relay socket
Protective vinyl sheath
Weather resistant

What's in the box?
(x1) Harness for SoundBomb-Horn
(x2) Posi-tap inline wire connectors for custom connection
(x2) Male lug for custom applications
(x2) Female cable lug for custom applications
(x4) Cable ties
(x1) 30amp Mini ATM fuse

KTM Motorcycle Note: The CAN bus system on most KTM motorcycles does not allow the original horn to be removed. You must leave the original horn connected to prevent malfunction lights from appearing on the dashboard.

BMW motorcycle Note: All modern BMW motorcycles use a special connector on the original horn socket. A DENALI horn wiring adapter is required for plug-n-play connection to BMW motorcycles and can be purchased HERE.

Automotive Note: Many modern vehicles use a special connector on the original horn socket. If your vehicle uses a special connector, use the supplied flat connector or posi-tap connectors to make the connection.

Installation Note: A 5-pin relay is NOT included with this kit. A relay is supplied with the purchase of a DENALI SoundBomb Compact or Split horn.