€140.08 (tax excl.)
- Reference: 33501852
- Producttype: LED Light bar
- Dimensions (mm): 527 (w) x 35 (h) x 72 (d)
- E-mark: Yes
- Beam type: Driving
- Sales unit: Single item
- Standard delivery time: 1-3 business days
€140.08 (tax excl.)
|
Wiring kit - Ledson - Connect - 1 lamp - 4 pins - Deutsch DT - 12V |
|
|
Wiring kit - Ledson - Connect - 2 lamps - 4 pins - Deutsch DT - 12V |
|
The Lazer 3-meter extension cable with 4 pins easily creates extra connections for all your 12V projects. This flexible cable is perfect for expanding your lighting or equipment setup. ...Continue |
Wiring kit - Lazer - Extension cable - 4 pins - Deutsch DT - 12V |
Juno C is the "sequel" to our extremely popular Juno LED bar. C stands for Curved, which means that the bar has a curved design. This makes it even more attractive on vehicles with a curved front in addition to 30 m extra range at 1 lux brightness!
Curved design (C = Curved) with Driving Beam light pattern (Drive)
A curved beam often looks neater mounted on the vehicle, as many cars have a slightly curved front end that a curved beam blends in nicely.
The Driving Beam 'imitates' the normal light pattern of the vehicle. So you get a similar light scatter as the low and high beams of your existing vehicle, but amplified.
Characteristics:
Curved design to suit cars with a curved front
Driving Beam light pattern (wide and elongated)
E marked (E9, ref. 45), ECE R112 / R10
CISPR25 class 3 (EMC protected)
6669 lumens (raw), 3928 lumens (actual)
Color temperature 5700K (bright white)
Range 720 m (0.25 lux), 450 m (1 lux)
Double mounting options: Supplied with brackets for side mounting and brackets for bottom and top mounting that fit around the LED bar.
Technical data:
90 W (18 x 5 W OSRAM LED)
IP68 (waterproof/dustproof)
IP69K: withstands hot water under pressure
Aluminum housing and polycarbonate lens
6.22 A at 12 V and 2.90 A at 24 V
DT plug with mating plug
Delivered:
Juno C LED bar
Side mounted brackets
Sliding brackets for upright or hanging mounting
bolts and nuts
DT plug
Installation manual
NOTE: The DT connector must not be cut as this increases the risk of moisture damage and will void the warranty. DT connector (male) supplied with the product.
Data sheet
Specific References
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent


€140.08 (tax excl.)
check_circle
check_circle