Car
Van
Truck
Pickup
Tractor
heavy equipment
Motorcycle
ATV
Camper
Classic Car
Boat
Tow Trailer
Trailer
Menu
-
MenuBack
-
Our products
-
Search vehicle-specific products
Controller - Denali - DialDim - Lighting controller
€315.95(tax incl.)
€261.12 (tax excl.)
- Reference: DNL.WHS.20500
- Producttype: Controller
- Sales unit: Single item
- Standard delivery time: 4-7 business days
The Denali DialDim controller allows you to control two sets of lights from one switch. With dimming, high beam sync, and horn flashing features, it provides versatile control for optimal visibility.
...ContinueDENALI DialDim lighting controller
The groundbreaking DialDim™ lighting controller features a multicolored halo dimmer switch that allows you to independently turn on/off and dim two sets of additional lights through a single consolidated wiring harness. The LED halo switch displays your exact settings and provides effortless dimming in the blink of an eye. The blue halo controls light set one and the green halo controls light set two; just double click to switch between the two circuits.
The controller also features high beam, turn signal and horn inputs to unlock intelligent flash functions that can cancel your assist lights with your turn signal, flash your assist lights like a turn signal or flash your lights when you sound your horn.
Makes it possible to sell a complete solution with easy control of all light functions
Independently switch on/off two sets of additional lamps and dim with a single switch
LED halo switch displays your exact settings
Unlock intelligent flash functions that can turn off your auxiliary lights with your turn signal, flash your auxiliary lights like a turn signal, or flash your lights when you honk.
On/Off & Dim
Independently control two sets of lights on/off and intensity level using the single DialDim™ switch. The blue halo controls light set one and the green halo controls light set two. Double click to switch between the two circuits.
High/Low sync
Your auxiliary lights will automatically switch from your selected dimming setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle's high beam circuit to enable this feature.
Sneak mode
A smart 0% dimming setting on the switch ensures your lights are "off" during normal driving conditions, but jump to 100% intensity with your vehicle's high beam switch. The lights will also respond to turn signals and horn signals in this mode, but will remain off if no signals are detected.
Cancel with turn signal
When enabled, the main lights (blue circuit 1) will be canceled in sync with your signal to avoid "washing out" your factory turn signal. Simply connect the yellow and orange input wires to your vehicle's turn signal circuit to enable this feature.
Flash as a turn signal
When enabled, your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle's turn signal circuit to enable this feature.
Stroboscope with horn
When enabled, your auxiliary lights on both circuits will flash at 4 Hz when you sound your horn. Simply connect the green input wire to your vehicle's horn circuit to enable this feature.
Electronically fused circuits
Both light circuits are electronically fused and can be set directly from the switch itself! The halo glows red to notify you when a fused circuit is activated.
Voltage display indicator
At vehicle start-up, the halo of the switch will flash green to indicate healthy battery voltage, or flash red to indicate battery voltage below 11.8V.
Low voltage shutdown
If the battery voltage drops below 10.8V, the lights will not turn on to avoid getting stuck. The halo of the switch will flash 4 red LEDs to indicate low voltage condition.
DNL.WHS.20500
Data sheet
- General: Accessory
- Wiring & electronics
- General: Producttype
- Controller
- General: Product serie
- DialDim
- General: Feature
- Lighting controller
- General: Series
- Lights & Styling
- certifications and delivery: Sales unit
- Single item
- certifications and delivery: Standard delivery time
- 4-7 business days
- Prodcat1
- H
- certifications and delivery: IR-code
- a1.L-D44.st
Specific References
- UPC
- 1
- Reference: DNL.WHS.20500
- Producttype: Controller
- Sales unit: Single item
- Standard delivery time: 4-7 business days
The Denali DialDim controller allows you to control two sets of lights from one switch. With dimming, high beam sync, and horn flashing features, it provides versatile control for optimal visibility.
...ContinueController - Denali - DialDim - Lighting controller
€315.95(tax incl.)
€261.12 (tax excl.)
check_circle
check_circle
Content not available