Beacon - Hella - KL 7000 - Surface mounted/Screwed - 12V-24V

Hella KL7000 LED 12V/24V
The KL 7000 LED rotating beacon is available with flashing or rotating light function. The signal is generated by means of an electronic concept and therefore without moving parts. The beacon can be connected to an operating voltage of 10 - 32 V and is available as fixed mounting variant (F), with mounting in a pipe sleeve (R) or with magnetic mounting (M). The fixed version can be mounted from above and below. The product is very flat and has a scratch-resistant and dirt-repellent smooth dome. The height of the beacon is approximately 119mm (F) to 194mm (R), depending on the design. It meets the requirements of IP 5K4K and IP X9K and is thus protected against dust and resistant to high-pressure cleaning. In addition, the KL 7000 LED enables a 1:1 exchange from halogen to LED technology, as it is the successor to the halogen beacon series KL 700 and KL 7000.

Definition:

Lamp type: LED - Number of LEDs: 8 - Power consumption: 10W
with rotating warning signal - Lens colour: Yellow
ADR/GGVS tested - Approval mark: ECE-R10/ECE-R65/SAE/RCM - Protection type: IPX9K/IP5K4K
Housing material: Plastic - Housing colour: Orange - Spreading disc material: PMMA (Polymethyl methacrylate)
Height: 119mm - Electromagnetic Compatibility (EMC)

Active thermal management: through the use of thermally conductive materials and the special arrangement of the components, the heat is dissipated from the LEDs and their lifespan is extended
An innovative electronic concept enables the light function without moving parts.
The impact-resistant and dirt-resistant dome ensures an optimum warning effect at all times.
The previous models KL 700 Halogen or KL 7000 Halogen can easily be converted to the KL 7000 LED
The beacon has a low power consumption and a high efficiency due to the rotating light function